The newest Epson AcuLaser MX14 driver is version 1.0.2.4 for Windows (released Feb 25, 2013) and version 1.014 for macOS (released Sep 10, 2021). Each button opens Epson’s official Download Center for your system.
Which Epson AcuLaser MX14 driver do I need?
Epson marks the Epson AcuLaser MX14 as discontinued but still publishes its drivers.
Epson AcuLaser MX14 driver at a glance
All Epson AcuLaser MX14 downloads from Epson
Epson AcuLaser MX14 Windows extras: firmware
Buttons open Epson’s Download Center for this model and system; Epson serves the file there. Epson publishes no checksums, so we show the version, date and size from Epson’s own list. Our guide to checking a driver download shows how to compare a file. Older systems may have more files on Epson’s page for the Epson AcuLaser MX14.
How to install the Epson AcuLaser MX14 driver
- Download the Printer Driver for your Windows version from the table above.
- Close any other open programs.
- Run the installer and follow its prompts.
- Connect the printer by USB when the installer asks, then print a test page.
- Mac users should download the macOS Printer Driver instead and run it the same way.
Epson also publishes a guided setup for the Epson AcuLaser MX14: Epson Setup Navi. Adding the printer by hand or installing on Linux? See our printer driver install guide.
Epson AcuLaser MX14 specifications
Source: Epson Europe product page for the Epson AcuLaser MX14 (SKU C11CB77051).
Epson AcuLaser MX14 driver troubleshooting
Windows does not detect the printer after installing
Check the USB cable at both ends and try another port. Restart the printer and the computer afterward. Reinstall the listed driver if the printer is still not detected.
I run a newer Windows or macOS version than the table lists
Pick the closest system in the table above and install that driver. The listed driver versions are the newest Epson publishes for this model, so no later ones exist.
The test page will not print after installation
Turn the printer off and on, then restart the computer. Run the driver installer again if the problem stays. Print another test page afterward.
For “driver is unavailable”, offline printers and stuck print jobs, see our printer driver troubleshooting guide.
Epson AcuLaser MX14 driver FAQ
Which download do I need for Windows 11?
Use the Windows Printer Driver, 109.8 MB. The same file covers Windows 11, Windows 10 (32-bit and 64-bit), and Windows 7 (32-bit and 64-bit).
Is there a Mac driver for the AcuLaser MX14?
Yes. The macOS Printer Driver is 2.4 MB and covers macOS 26, macOS 15, macOS 13, and macOS 10.15.
What is the Firmware Updater for?
It is software for obtaining and updating the latest firmware. It is listed only for Windows 7, both 32-bit and 64-bit, and is 3.1 MB.
Is scanner software listed for this model?
No. The MX14 has a flatbed scanner, but the only downloads listed are the printer drivers and the Windows 7 Firmware Updater.
Last checked: Nov 4, 2026. Epson and Epson AcuLaser MX14 are trademarks of Seiko Epson Corporation. This site is not affiliated with Epson.